Every living thing in this world needs water, and your grass is no exception. However, simply remembering to water your lawn is not enough. There are right and wrong ways to do it as experts in landscaping Sydney West can tell you. For example, if you do not give sufficient water to your grass, its roots will not grow deeply leaving your lawn in trouble during the height of summer. Also, if you leave your sprinkler system for a long time after dark, your lawn can become too moist, leaving it open to mould, which can result in disease. Before you start to water your lawn here are a few steps you should know and follow.
When should I water my Lawn?
Is your lawn looking faded or grey? If so, it needs a drink. Also while walking on your lawn if you leave lasting footprints on the grass, this is because there is not sufficient moisture in the leaf blades to spring back to shape.
At what time of the day should you water your Lawn?
According to experts, the best time for watering your lawn is before 10:00 a.m. after the sun is up. It’s usually cooler at this time of the day and winds are calm. These conditions allow the roots of the grass to absorb water before it evaporates. We understand that not all can be in their home to water your plants. For an alternate remedy, you can consult best landscapers Sydney West.
How much water should you use?
The good news is, you don’t have to worry about watering your lawn every day. Grass needs just about an inch or an inch and a half of water every week either from irrigation or rainfall. Water your garden until the top 6 to 8 inches of soil is wet. This should give your grass the water it needs.
How to know if your grass has enough water?
To tell if your lawn has sufficient water, there are a few ways.
During the first watering, make sure you check the soil every 15 minutes to know how long it takes to get soaked once you are sure that the water has gone 6-inch deep note the time. This is how long it will take in the future.
If you have installed a sprinkler system, find the flow rate from the manufacturer. Multiply the square footage of your lawn to 0.62 gallons which is equal to an inch of water per square foot. Divide that figure by the flow rate and the results will tell you how many minutes you should run your sprinkler.
If you are not sure about the best ways to water your lawn, turn to Sydney West landscaping companies where the experts will have spent years helping homeowners keep their lawns looking green.
The author is a blogger. He specialises in implementing unique designs that create a stunning floor between the interior and exterior of a home. For landscaping Sydney West, visit https://www.bloomlandscaping.com.au/.0